|
Refereed
Journal Articles
46. Hussein, M.I.,
Leamy, M.J., Ruzzene, M., 2013, “Dynamics of Phononic Materials and Structures: Historical Origins, Recent
Progress and Future Outlook,” invited paper, Applied Mechanics Reviews, submitted.
45. Manktelow,
K., Leamy, M.J., Ruzzene, M., 2013, “Topology Design and Optimization
of Nonlinear Periodic Materials,” Journal
of the Mechanics and Physics of Solids, submitted.
44. Karlson,
K.N., Leamy, M.J., 2013, “Three-Dimensional Equilibria
of Nonlinear Pre-Curved Beams Using an Intrinsic Formulation and
Shooting,” International
Journal of Solids and Structures, submitted.
43. Kluska, P., Staszewksi, W.J., Leamy, M.J., Uhl, T., 2013,
“Cellular Automata for Lamb Wave Propagation Modelling
in Smart Structures,” Smart
Materials and Structures, submitted.
42. Pei, D.,
Leamy, M.J., 2012, “Forward-Looking Simulation of the GM Front-Wheel
Drive Two-Mode Power-Split HEV Using a Dynamic Programming-Informed Equivalent
Cost Minimization Strategy,” SAE
International Journal of Alternative Powertrains, 2: 1-12.
41. Carrara, M., Cacan,
M.R., Toussaint, J., Leamy, M.J., Ruzzene, M., Erturk, A., 2012, “Metamaterial-Inspired Structures and Concepts for Elastoacoustic Wave Energy Harvesting,” Smart Materials and Structures,
accepted.
40. Pei, D.,
Leamy, M.J., 2012, “Dynamic Programming-Informed Equivalent Cost
Minimization Control Strategies for Hybrid-Electric Vehicles,” Journal of Dynamic Systems, Measurement
and Control, submitted.
39. Manktelow,
K., Leamy, M.J., Ruzzene, M., 2013, “Comparison of Asymptotic and
Transfer Matrix Approaches for Evaluating Intensity-Dependent Dispersion in
Nonlinear Photonic and Phononic Crystals,” Wave Motion, 50: 494-508.
38. Arata, J.P., Leamy, M.J., Cunefare,
K., 2012, “Power-Split HEV Control Strategy Development with Refined
Engine Transients,” SAE
International Journal of Alternative Powertrains, 1 (1): 119-133.
37. Carrara, M., Cacan,
M.R., Leamy, M.J., Ruzzene, M., Erturk, A., 2012, “Dramatic
Enhancement of Structure-Borne Wave Energy Harvesting Using an Elliptical
Mirror,” Applied Physics
Letters, 100 (20): 204105,
pp. 1-4.
36. Manktelow, K., Narisetti, R.K., Leamy, M.J., Ruzzene, M., 2012,
“Finite-Element Based Perturbation Analysis of Wave Propagation in
Nonlinear Periodic Structures,” Mechanical
Systems and Signal Processing, in press.
35. West, D., Lal, I., Leamy,
M.J., Hu, D.L., 2012, “Locomotion of Mexican Jumping Beans,” Bioinspiration & Biomimetics,
7: 036014, pp. 1-12.
34. Narisetti,
R.K., Ruzzene, M., Leamy, M.J., 2012, “Study of Wave Propagation in
Strongly Nonlinear Periodic Lattices Using a Harmonic Balance
Approach,” Wave Motion, 49: 394-410.
33. Leamy, M.J., 2012, “Exact Wave-Based
Bloch Analysis Procedure for Investigating Wave Propagation in
Two-Dimensional Periodic Lattices,” Journal of Sound and Vibration, 331: 1580-1596.
32. Leamy, M.J., 2012, “Intrinsic
Finite Element Modeling of Nonlinear Dynamic Response in Helical
Springs,” Journal of
Computational and Nonlinear Dynamics, 7 (3): 031007, pp. 1-9.
31. Autrusson, T.B., Sabra, K.G., Leamy, M.J., 2012,
“Reflection of Compressional and Surface Rayleigh Waves on the Edges
of an Elastic Plate with Quadratic Nonlinearity,” Journal of the
Acoustical Society of America, 131
(3): 1928-1937.
30. Leamy, M.J., 2011, “Calculation
of Phonon Dispersion in Carbon Nanotubes Using a Continuum-Atomistic Finite
Element Approach,” AIP Advances
1 (4): 041702, pp. 1-14.
Selected for inclusion in the January 16, 2012 issue of AIP’s Virtual Journal of Nanoscale
Science & Technology.
29. Kulpe, J.A., Lee, C.-Y., Leamy, M.J.,
2011, “Computation of Acoustic Absorption in Media Composed of Packed
Microtubes,” Journal of the Acoustical Society of America, 130 (2): 826-834.
28. Arata,
J.P., Leamy, M.J., Meisel, J., Cunefare, K.,
Taylor, D.G., 2011, “Backward-Looking Simulation of the Toyota Prius
and General Motors Two-Mode Power-Split HEV Powertrains,” SAE International Journal of Engines,
120 (1): pp. 1281-1297.
27. Narisetti,
R.K., Ruzzene, M., Leamy, M.J., 2011, “A Perturbation Approach for
Analyzing Dispersion and Group Velocities in Two-Dimensional Nonlinear
Periodic Lattices,” Journal of
Vibration and Acoustics, 133
(6): 061020, pp. 1-12.
26. Farzbod, F., Leamy, M.J., 2011,
“Analysis of Bloch's Method in Structures with Energy
Dissipation,” Journal of Vibration and Acoustics, 133 (5): 051010, pp. 1-8.
25. Kim, D., Leamy, M.J., Ferri, A.A.,
2011, “Dynamic Modeling and Stability Analysis of Flat Belt Drives
Using an Elastic/Perfectly-Plastic Friction Law,” Journal of Dynamic Systems, Measurement,
and Control, 133 (4):
041009, pp. 1-10.
24. Farzbod, F., Leamy, M.J., 2011,
“Analysis of Bloch’s Method and the Propagation Technique in
Periodic Structures,” Journal
of Vibration and Acoustics, 133
(3): 031010, pp. 1-7.
23. Manktelow, K., Leamy,
M., Ruzzene, M., 2011, “Multiple Scales Analysis of
Wave-Wave Interactions in a Cubically Nonlinear Monoatomic Chain,” Journal of Nonlinear Dynamics, 63: 193-203.
22. Hopman, R.
K., Leamy, M.J., 2011, “Triangular Cellular Automata for Computing
Two-Dimensional Elastodynamic Response on
Arbitrary Domains,” Journal of
Applied Mechanics, 78 (2): 021020, pp. 1-10.
21. Narisetti,
R.K., Leamy, M.J., Ruzzene, M., 2010, “A Perturbation Approach for
Predicting Wave Propagation in One-Dimensional Nonlinear Periodic
Structures,” Journal of
Vibration and Acoustics, 132
(3): 031001, pp. 1-11.
20. Lee, C.-Y., Leamy, M.J., Nadler,
J.H., 2010, “Frequency Band Structure and Absorption Predictions for
Multi-Periodic Acoustic Composites,” Journal of Sound and Vibration, 329: 1809-1822.
19. Lee, C.-Y., Leamy, M.J., Nadler,
J.H., 2009, “Acoustic Absorption Calculation in Irreducible Porous
Media: A Unified Computational Approach,” Journal of the Acoustical Society of America, 126 (4): 1862-1870.
18. Leamy, M.J., Lee, C.-Y., 2009,
“Dynamic Response of Intrinsic Continua for Use in Biological and
Molecular Modeling: Explicit Finite Element Formulation,” International Journal for Numerical
Methods in Engineering, 80
(9): 1171-1195.
17. Farzbod, F., Leamy, M.J., 2009,
“The Treatment of Forces in Bloch Analysis,” Journal of Sound and Vibration,
325: 545-551.
16. Leamy, M.J., DiCarlo,
A., 2009, “Phonon Spectra Prediction in Carbon Nanotubes Using a
Manifold-Based Continuum Finite Element Approach,” Computer Methods in Applied Mechanics
and Engineering, 198
(17-20): 1572-1584.
15. Leamy, M.J., 2008, “Application
of Cellular Automata Modeling to Seismic Elastodynamics,”
International Journal of Solids and
Structures, 45 (17):
4835-4849.
14. Hampton, R.D, Leamy, M.J., Bryant,
P.J., 2008, “Deformation and Flexibility Equations for Curved,
End-loaded, Planar Elastica,” AIAA Journal, 46 (2): 356-363.
13. Leamy, M.J., 2007, “Bulk
Dynamic Response Modeling of Carbon Nanotubes Using an Intrinsic Finite
Element Formulation Incorporating Interatomic Potentials,” International Journal of Solids and
Structures, 44 (3-4):
874-894.
12. Orloske,
K., Leamy, M.J., Parker, R.G., 2006, “Flexural-Torsional Buckling of
Misaligned Axially Moving Beams. I. Three-Dimensional Modeling, Equilibria, and Bifurcations,” International Journal of Solids &
Structures, 43 (14-15):
4297-4322.
11. Leamy, M.J., Wasfy,
T.M., 2005, “Dynamic Modeling of Timing Belt Frictional Contact Using
an Explicit Finite Element Formulation,” SAE Transactions Journal
of Engines, 114 (3):
605-610.
10. Leamy, M.J., Wasfy,
T.M., 2005, “Time-Accurate Finite Element Modelling
of the Transient, Steady-State, and Frequency Responses of Serpentine and
Timing Belt-Drives,” International
Journal of Vehicle Design, 39
(3): 272-297.
9. Leamy, M.J., 2005,
“On a Perturbation Method for the Analysis of Unsteady Belt-Drive
Operation,” Journal of Applied Mechanics, 72
(4): 570-580.
8. Leamy, M.J., Wasfy, T.M., 2002, “Transient and Steady-State
Dynamic Finite Element Modeling of Belt-Drives,” Journal of
Dynamic Systems, Measurement, and Control, 124 (4): 575-581.
7. Leamy, M.J., Wasfy, T.M., 2002, “Analysis of Belt-Drive
Mechanics Using a Creep-Rate Dependent Friction Law,” Journal of
Applied Mechanics, 69 (6): 763-771.
6. Leamy, M.J., Noor, A.K.,
Wasfy, T.M., 2001, “Sensitivity
Analysis of Bare-Wire Space Tether Systems,” Computer Methods in
Applied Mechanics and Engineering, 190
(42): 5495-5503.
5. Leamy, M.J., Noor, A.K.,
Wasfy, T.M., 2001, “Dynamic Simulation
of a Tethered Satellite System Using Finite Elements and Fuzzy-Sets,”
Computer Methods in Applied Mechanics and Engineering, 190 (37-38): 4847-4870.
4. Leamy, M.J., Gottlieb,
O., 2001, “Nonlinear Dynamics of a Taut String with Material
Nonlinearities,” Journal of Vibration and Acoustics, 123 (1): 53-60.
3. Leamy, M.J.,
Gottlieb, O., 2000, “Internal Resonances in Whirling Strings
Involving Longitudinal Dynamics and Material Nonlinearities,” Journal
of Sound and Vibration, 236
(4): 683-703.
2. Leamy, M.J.,
Barber, J.R., Perkins, N.C., 1998, “Distortion of a Harmonic Elastic
Wave Reflected From a Dry Friction Support,” Journal of Applied
Mechanics, 65 (4): 851-857.
1. Leamy, M.J.,
Perkins, N.C., 1998, “Nonlinear Periodic Response of Engine Accessory
Drives with Dry Friction Tensioners,” Journal of Vibration and
Acoustics, 120 (4): 909-916.
Book
Chapters
4. Leamy,
M.J., Springer, A.C., 2011, "Parallel Implementation of Triangular
Cellular Automata for Computing Two-Dimensional Elastodynamic
Response on Arbitrary Domains," selected to appear in Springer
Proceedings in Physics: The 10th International Conference on
Vibration Problems 2011, 139, Prague, Czech Republic, September
5-8.
3. Leamy,
M.J., 2011, "Nonlinear Dynamic Finite Element Modeling of Nano and Macroscale Systems Using an Intrinsic Beam
Formulation," an invited chapter to appear in the book Nonlinear
Modeling and Applications in Engineering, edited by Dr. Liming Pai and Dr. Reza Jazar, Springer; finished chapter
submitted May 30, 2011.
2. Meckstroth, R.J., Wasfy,
T.M., Leamy, M.J., 2004, "Finite Element Study of Dynamic Response of
Serpentine Belt-Drives with Isolator Clutches," a chapter in the book CAD/CAM/CAE
Technology and Design Tools, SAE International.
1. Leamy, M.J., Meckstroth, R.J., Wasfy,
T.M., 2004, "Finite Element Study of Belt-Drive Frictional Contact
under Harmonic Excitation," a chapter in the book CAD/CAM/CAE Technology
and Design Tools, SAE International.
Refereed
Conference Proceedings
52. Leamy, M.J., Emeneker, W., 2013,
“High Performance Computing of Elastodynamic
Response on Complex Domains Using Cellular Automata,” Proceedings of the 2013 International Conference
on Vibration Problems, Lisbon, Portugal, Sept. 9-12.
51. Manktelow, K., Leamy, M.J., Ruzzene,
M., 2013, “Topology Optimization of Nonlinear Acoustic Metamaterials,” Proceedings of the ASME 2013 International Design Engineering
Technical Conferences & Computers and Information in Engineering
Conference, Paper No. DETC2013-12960, Portland, OR, Aug. 4-7.
50. Leamy, M.J., 2013, “Wave-Based
Analysis of Buckling in Columns and Frames,” Proceedings of the ASME 2013 International Design Engineering
Technical Conferences & Computers and Information in Engineering
Conference, Paper No. DETC2013-12926, Portland, OR, Aug. 4-7.
49. Kluska, P., Staszewski, W.J., Leamy,
M.J., Uhl, T., 2012, “Lamb Wave Propagation Modeling Using Cellular
Automata,” 6th European Workshop
on Structural Health Monitoring, Dresden, Germany, July 3-6.
48. Pei, D., Leamy, M.J., 2013,
“Forward-Looking Simulation of the GM Front-Wheel Drive Two-Mode
Power-split HEV Using a Dynamic Programming-Informed Equivalent Cost
Minimization Strategy,” Paper No. 13PFL-0241, Proceedings of the 2013 SAE World Congress, Detroit, MI, April
16-18, 2013. Later accepted for journal publication – see journal
paper of same name.
47. Carrara, M., Cacan, M. R. , Toussaint, J., Leamy, M.J., Ruzzene, M., Erturk, A.,
2012, “Metamaterial Concepts for
Structure-Borne Wave Energy Harvesting: Focusing, Funneling, and
Localization,” Proceedings of
the ASME 2012 Conference on Smart
Materials, Adaptive Structures and Intelligent Systems, Paper No.
SMASIS2012-8166, Stone Mountain, GA, Sept. 19-21.
46. Karlson, K., Leamy, M.J., 2012,
“Three-Dimensional Equilibria and Stability
of Nonlinear Curved Beams Using Intrinsic Equations and Shooting,” Proceedings of the ASME 2012
International Design Engineering Technical Conference, Paper No.
IDETC2012-70428, Chicago, IL, Aug. 12-15.
45. Manktelow, K., Leamy, M.J., Ruzzene,
M., 2012, “Toplogy Design and Optimization
of Nonlinear Metamaterials,” Proceedings of the ASME 2012
International Design Engineering Technical Conference, Paper No.
IDETC2012-70130, Chicago, IL, Aug. 12-15.
44. Arata, J.,
Leamy, M.J., 2012, “Power-Split HEV Control Strategy Development with
Refined Engine Transients,” Paper No. SAE 2012-PFL-0485, Proceedings of the 2012 SAE World
Congress, Detroit, MI, April 24-26, 2012. Later accepted for journal
publication – see journal paper of same name.
43. Manktelow, K., Leamy, M.J., Ruzzene,
M., 2011, “Intensity-Dependent Dispersion in Nonlinear Phononic Layered Systems,” Proceedings of the ASME 2011 International Mechanical Engineering
Congress and Exposition, Paper No. IMECE2011-64933, Denver, CO, Nov.
11-17.
42. Narisetti,
R.K., Leamy, M.J., Ruzzene, M., 2011, “Wave Propagation in
Membrane-Based Nonlinear Periodic Structures.” Proceedings of the ASME 2011 International Design Engineering
Technical Conferences & Computers and Information in Engineering
Conference, Paper No. DETC2011-48700, Washington, D.C., Aug. 28-31.
41. Arata, J.,
Leamy, M.J., Meisel, J., Cunefare, K., Taylor,
D., 2011, “Backward-Looking Simulation of the Toyota Prius and
General Motors Two-Mode Power-Split HEV Powertrains” Proceedings of the 2011 SAE World
Congress, Paper 11PFL-0790, April 12-14, Detroit, MI. Later accepted for journal
publication – see journal paper of same name.
40. Farzbod, F., Leamy, M.J., 2010,
“Analysis of Bloch's Method in Structures with Energy
Dissipation” Proceedings of the
ASME 2010 International Mechanical Engineering Congress and Exposition,
Paper No. IMECE2010-39433, Vancouver, British Columbia, Canada, Nov. 12-18.
39. Narisetti,
R.K., Ruzzene, M., Leamy, M.J., 2010, “Wave Dispersion and
Directionality in Two-Dimensional Strongly Nonlinear Periodic
Lattices,” Proceedings of the
ASME 2010 International Mechanical Engineering Congress and Exposition,
Paper No. IMECE2010-39152, Vancouver, British Columbia, Canada, Nov. 12-18.
38. Boechler,
N., Daraio, C., Narisetti,
R.K., Ruzzene, M., Leamy, M.J., 2010, “Analytical and Experimental
Analysis of Bandgaps in Nonlinear One Dimensional
Periodic Structures,” to appear, a chapter in the IUTAM Symposium on
Recent Advances of Acoustic Waves in Solids, Eds. T.T. Wu and C.-C. Ma,
Kluwer Academic Publishers.
37. Leamy, M.J., 2010, “Intrinsic
Finite Element Modeling of Nonlinear Dynamic Response in Helical
Springs,” Proceedings of the
ASME 2010 International Mechanical Engineering Congress and Exposition,
Paper No. IMECE2010-37434, Vancouver, British Columbia, Canada, Nov. 12-18.
36. Narisetti,
R.K., Ruzzene, M., Leamy, M.J., 2010, “Amplitude Dependent Dispersion
in Essentially Nonlinear Periodic Chains,” Proceedings of the ASME 2010 International Design Engineering
Technical Conferences & Computers and Information in Engineering
Conference, Paper No. DETC2010-29014, Montreal, Quebec, Canada, Aug. 15-18.
35. Hopman,
R.K., Leamy, M.J., 2009, “Arbitrary Geometry Cellular Automata for Elastodynamics,” Proceedings of the ASME 2009 International Mechanical
Engineering Congress & Exposition, Paper No. IMECE2009-11222, Lake
Buena Vista, FL, Nov 13-19.
34. Lee, C-Y., Leamy, M.J., Nadler, J.H.,
2009, “Acoustic Band-gap Formulation in Infinite Periodic Porous
Media with a Multi-layered Unit Cell: Multi-scale Asymptotic Method,”
Proceedings of the ASME 2009
International Mechanical Engineering Congress and Exposition, Paper No.
IMECE2009-11358, Lake Buena Vista, FL, Nov. 13-19.
33. Thibaut,
A., Leamy, M., and Sabra, K., 2009, “Numerical Modeling of Non-linear
Ultrasonic Wave Propagation Using Cellular Automata,” Proceedings of the 7th International
Workshop on Structural Health Monitoring, pp. 1801-1808, Stanford, CA
Sept 9-11.
32. Narisetti,
R.K., Ruzzene, M., Leamy, M.J., 2009, “Wave Propagation in Two
Dimensional Nonlinear Periodic Lattices,” Proceedings of the ASME 2009 International Design Engineering Technical
Conferences & Computers and Information in Engineering
Conference, Paper No. DETC2009-86279, San Diego, CA, Aug. 30-Sept. 2.
31. Kim, D., Leamy, M. J., and Ferri, A.,
2009, “Dynamic Modeling of Flat Belt Drives using the
Elastic-Perfectly-Plastic Friction Law,” Proceedings of the ASME 2009 International Design Engineering Technical
Conferences & Computers and Information in Engineering
Conference, Paper No. DETC2009-87296, San Diego, CA, Aug. 30-Sept. 2.
30. Ferri, A.A., Leamy, M.J., 2009,
“Error Estimates for Harmonic-Balance Solutions of Nonlinear
Dynamical Systems,” Proceedings
of the 2009 AIAA, ASME, ASCE, AHS, and ASC 50th Structures, Structural
Dynamics, and Materials Conference (SDM), Paper No. AIAA-2009-2667,
Palm Springs, CA, May 4-7.
29. Narisetti,
R.K., Leamy, M.J., Ruzzene, M., 2008, “Wave propagation in a
Two-Dimensional Nonlinear Periodic Structure: A Perturbation
Approach,” Symposium on
Nonlinear Localization and Targeted Energy Transfer Phenomenon in Dynamical
Systems, Society of Engineering Science, 45th Annual
Technical Meeting, Paper No. , University of Illinois at Urbana-Champaign,
Oct 12-15.
28. Hussein, M.I., Leamy, M.J., Ruzzene,
M., 2008, “Wave Beaming in Nanostructured Materials with Engineered
Defects,” Proceedings of the ASME
2008 International Mechanical Engineering Congress and Exposition,
Paper No. IMECE2008-68257, Boston, MA, Oct. 31-Nov. 6.
27. Hussein, M.I., Ruzzene, M., Leamy,
M.J., Durrie, J.J., Davis, B. L., 2008,
“NEMS Component Design Using Intentionally Defected Dispersive
Building Blocks,” Proceedings
of the ASME 2008 International Mechanical Engineering Congress and
Exposition, Paper No. IMECE2008-68246, Boston, MA, Oct. 31-Nov. 6.
26. Lee, C.-Y., Leamy, M.J., Nadler,
J.H., 2008, “Numerical Calculation of Effective Density and
Compressibility Tensors in Periodic Porous Media: A Multi-Scale Asymptotic
Method,” Proceedings of the
COMSOL Conference 2008, Boston, MA, Oct. 9-11.
25. Leamy, M.J., 2008, “A
Systematic Approach for Aligning ODE and Agent-Based Models: Application to
Epidemiological Modeling,” Proceedings
of the ASME 2008 Computers and Information in Engineering Conference,
Paper No. DETC2008-49291, New York, NY, Aug. 3-6.
24. Leamy, M.J., 2008, “A Cellular
Automata Modeling Approach for Continuum Elastodynamics,”
Proceedings of the ASME 2008
Computers and Information in Engineering Conference, Paper No.
DETC2008-49255, New York, NY, Aug. 3-6.
23. Leamy, M.J., DiCarlo,
A.A., 2007, “Phonon Prediction in Toroidal
Carbon Nanotubes Using a Continuum Finite Element Approach,” Proceedings of the ASME 2007
International Design Engineering Technical Conferences, Paper No.
DETC2007-35907, Las Vegas, NV, Sept. 4-7.
22. Orloske,
K., Leamy, M.J., Parker, R.G., 2006, “Flexural-Torsional Buckling of
Misaligned Axially Moving Beams,” Proceedings
of the ASME 2006 International Mechanical Engineering Congress and
Exposition, Paper No. IMECE2006-14192, Chicago, IL, Nov. 5-10.
21. Leamy, M.J., 2005, “Dynamic
Finite Element Modeling of Carbon Nanotubes Using an Intrinsic Formulation,”
Proceedings of the ASME 2005
International Design Engineering Technical Conferences, Paper No.
DETC2005-84482, Long Beach, CA, Sept. 24-28.
20. Wasfy,
T.M., Leamy, M.J., 2005, “Modeling the Dynamic Frictional Contact of
Tires Using an Explicit Finite Element Code,” Proceedings of the ASME 2005 International Design Engineering
Technical Conferences, Paper No. DETC2005-84694, Long Beach, CA, Sept.
24-28.
19. Wasfy,
T.M., Leamy, M.J., 2005, “Dynamic Modeling of Synchronous Belt-Drives
Using an Explicit Finite Element Code,” Proceedings of the ASME 2005 International Design Engineering
Technical Conferences, Paper No. DETC2005-85103, Long Beach, CA, Sept.
24-28.
18. Leamy, M.J., Wasfy,
T.M., 2005, “Dynamic Modeling of Timing Belt Frictional Contact Using
an Explicit Finite Element Formulation,” Proceedings of the 2005 SAE World Congress, Paper 2005-01-0503,
April 11-14, Detroit, MI.
17. Wasfy,
T.M., Leamy, M.J., Meckstroth, R. J., 2004,
“Prediction of System Natural Frequencies Using an Explicit Finite Element
Code with Application to Belt-Drives,” Proceedings of ASME 2004
Design Engineering Technical Conferences, Paper No.
DETC2004-57117, Sept. 28-Oct 3, Salt Lake City, Utah.
16. Leamy, M.J., Wasfy,
T.M., Meckstroth, R.J., 2004, “Finite
Element Study of Belt-Drive Frictional Contact under Harmonic
Excitation,” Proceedings of the
2004 SAE World Congress, Paper 04B-173, March 8-11, Detroit, MI.
15. Meckstroth,
R. J., Wasfy, T.M., Leamy, M.J., 2004, “Finite
Element Study of Dynamic Response of Serpentine Belt-Drives with Isolator
Clutches,” Proceedings of the
2004 SAE World Congress, Paper 04B-174, March 8-11, Detroit, MI.
14. Leamy, M.J., 2003, “Dynamic
Analysis of the Time-Varying Operation of Belt-Drives,” Proceedings of the ASME 2003 Design Engineering Technical
Conferences, Paper No.
DETC2003/VIB-48346, Chicago, September 2-6.
13. Leamy, M.J., Hampton, R.D., 2003,
“Verification of Deformation and Flexibility Equations for Curved Elastica,” Proceedings
of the AIAA 41st
Aerospace Sciences Meeting and Exhibition, Reno, NV, January
6-9: AIAA-2003-1004.
12. Wasfy,
T.M., Leamy, M.J., 2002, “An Object-Oriented Graphical Interface for
Dynamic Finite Element Modeling of Belt-Drives,” Proceedings of the ASME
2002 Design Engineering Technical Conferences, Paper No. DETC2002/MECH-34224, Montreal,
Canada, September 29-October 2.
11. Wasfy,
T.M., Leamy, M.J., 2002, “Effect of Bending Stiffness on the Dynamic
and Steady-State Responses of Belt-Drives,” Proceedings of the ASME
2002 Design Engineering Technical Conferences, Paper No. DETC2002/MECH-34223, Montreal,
Canada, September 29-October 2.
10. Seaward, G.H., Leamy, M.J., Arnas, A.O., 2002, “An Undergraduate Mechanical
Engineering Laboratory Project for Predicting and Measuring Off-road
Vehicle Mobility,” Proceedings of the 2002 American Society for
Engineering Education Zone 1 Conference, West Point, NY, April
5-6.
9. Hampton, R.D.,
Leamy, M.J., Bryant, P.J., 2002, “Deformation and Flexibility
Equations for Idealized, Curved ARIS Umbilicals,
Under Planar End-Loading Conditions,” Proceedings of the AIAA 40th
Aerospace Sciences Meeting and Exhibition, Reno, NV, January
14-17: AIAA-2002-1132.
8. Leamy, M.J., Wasfy, T.M., 2001, “Dynamic Finite Element
Modeling of Belt-Drives Including One-Way Clutches,” Proceedings of the ASME 2001 International Mechanical
Engineering Conference and Exposition, New York, NY, November
11-16.
7. Leamy, M.J., Wasfy, T.M., 2001, “Dynamic Finite Element
Modeling of Belt-Drives,” Proceedings
of the ASME 18th
Biennial Conference on Mechanical Vibration and Noise, Pittsburgh,
PA, September 9-12.
6. Leamy, M.J., Wasfy, T.M., 2001, “Analysis of Belt-Drive
Mechanics Using a Creep-Rate Dependent Friction Law,” Proceedings of the ASME 18th Biennial Conference
on Mechanical Vibration and Noise, Pittsburgh, PA, September
9-12.
5. Leamy, M.J.,
Gottlieb, O., 1999, “Nonlinear Dynamics of a Taut Spatial String with
Material Nonlinearities,” Proceedings
of the ASME 17th
Biennial Conference on Mechanical Vibration and Noise, Las
Vegas, NV, September 12-15.
4. Gottlieb, O.,
Leamy, M.J., Poignant, R., 1999, “An Experimental Investigation of
Nonlinear Material Effects in Periodically Whirling Cables and
Strings,” 3rd International Symposium on Cable Dynamics,
Trondheim, Norway, August 17-19.
3. Leamy, M.J.,
Barber, J.R., Perkins, N.C., 1999, “Dynamics of Belt/Pulley
Frictional Contact,” a chapter in the IUTAM Symposium on
Unilateral Multibody Dynamics, Eds. E. Pfeiffer and Ch. Glocker, Kluwer Academic Publishers.
2. Leamy, M.J.,
Perkins, N.C., 1997, “Periodic Response of Front End Accessory Drives
with Dry Friction,” Proceedings
of the ASME 16th
Biennial Conference on Mechanical Noise and Vibration, Sacramento,
CA, Sept. 14-17, Paper No. DETC97/VIB-3912.
1. Leamy, M.J.,
Perkins, N.C., Barber, J.R., Meckstroth, R.J.,
1997, “The Influence of Tensioner Friction on Accessory Drive
Dynamics,” 1997 SAE Noise & Vibration Conference &
Exposition, Traverse City, MI, May 20-22, Paper No. 97NV103.
|
